Cnc Holder Mcd Turning Tool HRC45 Single Crystal Sintered Carbid

High Effective HRC45 cnc holder external mcd turning tool Single crystal diamond insert

    Diamond polishing knife is composed of two materials: PCD polycrystalline diamond rough throwing knife and ND natural diamond fine (fine) throwing knife, in turn installed in the special polishing knife plate can be in the diamond polishing machine, grinding machine and CNC center (CNC) or milling machine equipment on the acrylic plate, one time to complete rough and fine polishing.
The tool is composed of natural diamond (PCD) polishing knife, good polishing effect, fine grain. The tool grinding process is mature, the chip removal performance is excellent, can complete the polishing of dozens of plates at one time, is the organic plate batch polishing, edge grinding efficiency, high yield, highlight of the first choice tool.
1) In the process of processing different materials, to achieve different effects of the knife selection process, it is recommended to use the tool with a short edge as far as possible. Because the cutting edge is too long or the tool body is too long will cause the processing of the tuning and deflection, resulting in tool damage and processing product quality.
2) Must use the appropriate size of the jacket, due to serious wear or not enough round and inner hole with taper jacket, can not provide enough clamping strength, resulting in vibration or twist the handle and fly off.
3) When the tool is found to have uneven contact marks or grooves on the tool handle after clamping, it indicates that there is slip or deformation of the inner hole of the fixture. The jacket should be replaced immediately. The tool handle and jacket must be fully tightened and firm, in order to encourage the tool handle fracture or accident.
It should be avoided to contact the single crystal diamond tool with the workpiece or other hard objects in the static state, so as to prevent the cutting edge from being damaged, and avoid stopping when the tool does not leave the workpiece during cutting
Diamond knife blade is easy to damage, when the blade is not working, use rubber or plastic cap to protect the blade and place it in a separate knife case for safekeeping, before each use with alcohol to wipe the blade clean before working
Maintain the environment and machine performance stability, personnel operation proficiency and so on have an impact on the life of the tool.

1. Customers send detailed inquiry to us by email;

2. We reply with price, specifications, packing, photos, and other details;

3. Both of us agree the price and confirm the details;

4. We write the proforma invoice and send to customers;

5. Customers make deposit;

6. We make mass production samples;

7. We send mass product samples or send photos to customers for approval;

8. Customers confirm the mass production samples;

9. We start mass production.(we have huge stock for most standard end mills);

Business Terms

Accepted Delivery Terms: FOB,CNF,CIF

Accepted Payment Currency: USD, CNY

Accepted Payment Type: T/T, Western Union

Nearest Port: Guangzhou port, Shenzhen port, Shanghai port

Response Rate (last 30 days)

98.6% of buyers who contacted this supplier received a response within 24 hours.

Average Response Time (7 days)

The supplier's average response time of received inquiries is within 12 hours.

Quotation Performance (last 30 days)

The supplier have sent 33 quotes to buyers in last 30 days.

Q: Are you Manufacture?

A: Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q: What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1. Make sure work piece and machine are stable and use a precision holder.
• 2. Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3. The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.