Payment & Shipping Terms:
|Overall Length:||35-100mm||Product Name:||MCD High Gloss Chamfer Milling Cutter|
|Flute Length:||40-70mm||Suitable For:||Acrylic, PVC, PC, PET, PMMA, Gold, Silver, Cooper|
|Application:||Engraving Machine, Engraving Machine, High Gloss Machine||Advantages:||Cleaning Surface With Polishing And Highlight Effect|
|Material:||Carbide, Yellow Single Crystal Diamond||Packing:||1ps/ Plastic Box|
Acrylic Mirror MCD Side Milling Cutter,
Single Crystal MCD Side Milling Cutter,
Carbide MCD Diamond Milling Cutter
Side milling cutter MCD single crystal diamond high-gloss for acrylic side and bottom mirror highlight processing
Single crystal workshop (This workshop only makes single crystal diamond cutting tool,manual grinding wheel, directly grinding diamond knife at the Angle of the grinding wheel, directly grinding the finished product).
Need to go through the precision workshop (laser or slow wire), single crystal workshop, strong grinding.[after tool welding, transfer to precision workshop, laser finishing Angle, then transfer to single crystal workshop, single crystal grinding good Angle, transfer to strong grinding finishing Angle (arc).
After welding, transfer to PCD workshop strong grinding machine, strong grinding fine repair edge, this is the finished product (most workshop PCD tools).
Some diamond knives need a single crystal workshop grinding wheel to grind the Angle, and then transfer the strong grinding Angle (blade).
Some diamond cutters require laser or slow wire cutting to finish the diamond and then turn over to a powerful sharpening blade.
The diamond tools have low consumption of unit knife, long useage, easy to use features, and to ensure high precision and each mirror smooth finish
>> The more detail information about our crystal diamond tool:
>>Diamond cutting tools are easily damaged, so the cutting edge should be covered with rubber or plastic caps when they are not in use.
>> Store them in separate containers when not in usage.
>> When inspecting and setting up,plz use optical instruments if possible.
>> Use copper shimstock or plastic between the cutting tools and micrometers or height gauges. If these are used, to avoid breaking the cutting edge.
>> Don't bring the diamond into contact with the work in a stationary position or stop the machine during the cut.
>> High speed reduces cutting edge pressure; low speed increases it, causing diamonds to break down more rapidly.Vibration also shortens tool life, so machine tools should be in good condition.
Diamond (PCD) cutting tool is mainly used for mobile phone, laptop computer, audio, DVD and other panel highlight chamfering.It has the advantages of long tool life, high processing efficiency, low cost and high surface finish.It is the best choice for high gloss processing.High precision product quality, complete specifications.
And external custom all non-standard cutting tools.The company's products are made of South African natural diamond raw materials, GE of the United States and DEBEERS of the United Kingdom to produce a variety of super hard materials.The main production of three series of products: natural diamond (MCD) series, polycrystalline diamond (PCD) series, cubic boron nitride (PCBN) super hard series tools.
Products are widely used in aluminum products, watch parts, gold and silver jewelry, optical parts, motor parts, military industry, auto parts and other precision and ultra-precision machinery industry.
1) Artificial polycrystalline diamond (PCD) is a polycrystalline material made of diamond powder and solvent polymerization under high temperature and high pressure. Its hardness is lower than that of natural diamond (about HV6000). The hardness of PCD tool is 3-4 times higher than that of hard alloy tool.
Wear resistance and life of 50-100 times;
Cutting speed can be increased 5-20 times;
The roughness can reach Ra0.05μm, and the brightness is inferior to that of natural diamond knife
2) Natural diamond (diamond) hardness up to HV9000-10000, is the hardest substance in nature.
The tool can keep the size stable for a long time in cutting, so it has a long service life.
The cutting tool made of natural diamond has no gap under 400 times microscope. It is suitable for processing gold, silver, copper, aluminum (aluminum alloy), zinc (zinc alloy), acrylic (plexiglass) and other materials.
The surface roughness can reach Ra(0.01-0.025)μm.
High cutting efficiency and stable machining accuracy.
|MCD Recommended Cutting Condition|
|Work piece||Cutting Speed||Depth of Cut||Feed Rate|
|Aluminum(5~8% SI )||350~1600||0.05~2.50||0.10~0.40|
|Aluminum(8~12% SI )||350~1300||0.05~2.50||0.10~0.40|
|Aluminum(14~18% SI )||160~800||0.05~2.50||0.05~0.25|
|Welcome and congratulations!You found us a professional factory!|
|Size & Design||
1.We not only supply all kinds of high quality solid carbide turning tool ,but
also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw
Blades and Milling cutter,There are diamond grinding wheel, diamond dressing tools and hardness head.
2. We have 0.02mm-25mm different diameter and 38mm-150mm length
Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you
3.OEM:Special Cutters Customized acceptable!Coated OEM also.We can
produceaccording to your drawing,too.Or the hot deisgned recommend
|4. HS Code reference for you to control everything:8207709000.|
|5. Mixed size and types in one batch available.|
|6. For distributor,we can label your brands on cutters and plastic box.|
1. We accept Mix coated in the same model number, Also one batch with
different coating and types.
|2. AlTiN,TiAlN,TiSiN,TiN,DLC,NANO for you to choose to win your competitors!|
|MOQ (Small Qty )||5-10-500-1000-5000-10000 pcs all are welcome. 5 pieces per order is MOQ.|
We package all our goods carefully.We also accept your packing design OEM
packing it for your control.
|Samples Service||1. Some items free samples for you.|
|2. Free samples but pay shipping cost.|
|3. Lowest shiping fee for you to choose.|
|4. Order to us,sample fee will be refund to you.|
|5. Become our VIP clients,free samples for you!|
|6.OEM samples are hot welcome.|
1. Customers send detailed inquiry to us by email;
2. We reply with price, specifications, packing, photos, and other details;
3. Both of us agree the price and confirm the details;
4. We write the proforma invoice and send to customers;
5. Customers make deposit;
6. We make mass production samples;
7. We send mass product samples or send photos to customers for approval;
8. Customers confirm the mass production samples;
9. We start mass production.(we have huge stock for most standard end mills);
Accepted Delivery Terms: FOB,CNF,CIF
Accepted Payment Currency: USD, CNY
Accepted Payment Type: T/T, Western Union
Nearest Port: Guangzhou port, Shenzhen port, Shanghai port
Response Rate (last 30 days)
98.6% of buyers who contacted this supplier received a response within 24 hours.
The supplier's average response time of received inquiries is within 12 hours.
Quotation Performance (last 30 days)
The supplier have sent 33 quotes to buyers in last 30 days.
Q: Are you Manufacture?
A: Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q: What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Mr. huang
Tel: 0755-2765 4077