2 Flutes Polycrystalline Diamond Cutting Tools PCD Corner Radius For Acrylic

PCD Corner Radius Cutting tools PCD Cutting Tools 2 Flutes Diamond Endmill Cutter For Acrylic

Polycrystalline Diamond PCD Insert:

PCD (Polycrystalline Diamond) is a synthetic diamond product that is produced by sintering together selected diamond particles with a metal matrix, using sophisticated technology. The diamond and matrix, when sintered together under high temperatures and pressures, creates a PCD tool blank that is high in uniform hardness and is abrasive resistant in all directions. PCD Inserts is made of PCD tips( cutting from PCD blank) and a carbide substrate.

It's used to machine wide range materials such as nonferrous metal,likeAluminum,Aluminum Alloy,Copper,Copper Alloy,Tungsten Carbide,Wood,Reinforced Plastic,Rubber,Graphite,Composite Material,Carbon Fiber,Glass Fiber,Composite Ceramic ect....

1) In the process of processing different materials, to achieve different effects of the knife selection process, it is recommended to use the tool with a short edge as far as possible.
Because the cutting edge is too long or the tool body is too long will cause the processing of the tuning and deflection, resulting in tool damage and processing product quality.
2) Must use the appropriate size of the jacket, due to serious wear or not enough round and inner hole with taper jacket, can not provide enough clamping strength, resulting in vibration or twist the handle and fly off.
3) When the tool is found to have uneven contact marks or grooves on the tool handle after clamping, it indicates that there is slip or deformation of the inner hole of the fixture.
The jacket should be replaced immediately.
The tool handle and jacket must be fully tightened and firm, in order to encourage the tool handle fracture or accident.
4) Keep the tool clean after work, and use standard industrial solvents to remove dirt sticking on the tool.
5) Do not arbitrarily from the grinding tool and change the tool type, because each grinding process requires professional grinding equipment and professional grinding skills.
Otherwise, it is easy to cause knife edge fracture and accidents.

OTHER

1. Make according to customer samples, drawings and instructions to improve cooperation efficiency and accuracy.

2, the specific use requirements of customers, to communicate clearly with our company's technical personnel, we according to your specific situation, recommend appropriate products, in order to ensure product performance while reducing costs.

3. The quality, size and difficulty of the diamond production process determine the price of the product, and the structure of the diamond determines the performance of the product. The structure of the handle body is made according to the installation requirements of the machine tool, so please choose the demand reasonably.
Suitable for processing non-ferrous metal (copper, aluminum, zinc, titanium, etc.) and organic plate end face, outer circle part of the high-gloss processing, high-precision tip arc and experienced edge grinding process,
Assembly in good stability of the CNC machine tool after cutting can make the plate processed surface to produce mirror effect, and the finish of RA0.2 or more
The diamond cutting tools produced by our company not only have strong wear resistance, but also have good chip removal performance. They are the first choice for precision machining with high efficiency, high brightness and high finish.

1. Customers send detailed inquiry to us by email;

2.We reply with price, specifications, packing, photos, and other details;

3. Both of us agree the price and confirm the details;

4.We write the proforma invoice and send to customers;

5.Customers make deposit;

6.We make mass production samples;

7.We send mass product samples or send photos to customers for approval;

8.Customers confirm the mass production samples;

9.We start mass production.(we have huge stock for most standard end mills);

10. We show ready products' photos or customers inspect on site;

11.Customers make balance payment;

12.Delivery is arranged. Feedback from customers for better work in future.

13.We also make OEM and customized end mills.

Diamond Tool Re-lapping / Polishing/Re-shaping

We supply service for re-lapping and polishing the diamond tools to increase tool life and performance. The tools can be re-polished about 60-70 times.We have more than 150 trained technicians who can offer fast re-polishing service for diamonds tools.For more details,please contact our sales.

Diamond Jewellery Manufacturing Consultation

We also provide consultation service in setting up new production line for jewellery making. With about 30 years of experience in the jewellery manufacturing industry. We have rich experience for jewellery making. We have full range of diamond tools that used for jewellery cutting and texturing.
Our technicans will give you valuable suggestions on how to selection the most suitable tool and machines for your company.

Q: Are you Manufacture?
A: Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q: What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
 
Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1. Make sure work piece and machine are stable and use a precision holder.
• 2. Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3. The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.