Payment & Shipping Terms:
|Usage:||CNC Machine Tool Processioning||Accepted Payment Type::||T/T|
|Nearest Port:||Guangzhou Port, Shenzhen Port, Shanghai Port||Accepted Payment Currency:||USD, CNY|
1600m/Min CNC Diamond Cutter,
2 Flute CNC Diamond Cutter,
100mm Length Diamond Cutting Tools
High quality CNC Diamond cutter for AluminumManufacturers Wholesale High-Quality Pcd Cutter
1) The hardness of PCD can reach 8000HV, which is 8~12 times of hard alloy;
2)The thermal conductivity of PCD is 700W/mK, 1.5~9 times of hard alloy, even higher than PCBN and copper, so PCD tool heat transfer quickly;
3)The friction coefficient of PCD is generally only 0.1~0.3(the friction coefficient of cemented carbide is 0.4~1), so PCD tool can significantly reduce the cutting force;
4)PCD's thermal expansion coefficient is only 0.9×10^-6~1.18×10^-6, only equivalent to 1/5 of the hard alloy, so the PCD tool thermal deformation is small, high processing precision;
5)THE affinity between PCD tool and non-ferrous metal and non-metallic materials is very small, in the process of cutting chip is not easy to bond to the tip of the knife to form a chip tumor.
PCD forming milling cutter of the special features: for mobile phone shell, panel, mobile phone lens, digital lenses, camera lenses, MP3 / MP4 lens, VCD, DCD, digital Windows, electrical name plate and other CNC chamfering, milling processing, high precision cutting tool size (+ / - 0.01 mm), processing product is no burr and long tool life, high machining efficiency, low cost and high surface finish, etc. Is the best choice of CNC precision machining!
PCD milling cutter application: gold, silver, copper, aluminum, acrylic, PC, PET...Nonmetallic material carving and milling processing.Hardware car parts;Auto parts;Surface treatment;
Technological products;Carved;Copper batching;Mobile phone metal buttons;Mobile phone case;Digital enclosure;Non-metallic high-gloss batch;Watch surface, word nail;Internal reflection knife in the case;Nameplate, nameplate highlight flower;Car CD lines;Car colorful grain;Car spattern;Aluminum product highlights;Electrical shell batching;Electrical panel;Vehicle panel;Computer peripherals;Transparent computer case;Acrylic polishing;Acrylic (plexiglass) highlight (polishing) chamfering;The lens;Windows;Motor commutator fine car, etc.
1) The appropriate size of the jacket must be used, because of serious wear or not round enough and the taper of the inner hole of the jacket, can not provide enough clamping force, resulting in vibration or twist of the handle and fly off.
2) When the tool holder is found to have uneven contact marks or grooves after clamping, it indicates that there is slippage or deformation of the inner hole of the fixture.The jacket should be replaced immediately.The tool handle and the jacket must be sufficiently tight and firm to cause the tool handle to break or have an accident.
3) Keep the tool clean after work, and use standard industrial solvents to remove the dirt stuck on the tool.
4) Do not change the tool type or the tool type without authorization, because each grinding process requires professional grinding equipment and professional grinding skills.Otherwise, it is easy to cause the knife edge to break and produce an accident
PCD Recommended Cutting Condition
|Work piece||Cutting Speed||Depth of Cut||Feed Rate|
|Aluminum(5~8% SI )||350~1600||0.05~2.50||0.10~0.40|
|Aluminum(8~12% SI )||350~1300||0.05~2.50||0.10~0.40|
|Aluminum(14~18% SI )||160~800||0.05~2.50||0.05~0.25|
|Welcome and congratulations!You found us a professional factory!|
|Size & Design||
1.We not only supply all kinds of high quality solid carbide turning tool ,but
also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw
Blades and Milling cutter,There are diamond grinding wheel, diamond dressing tools and hardness head.
2. We have 0.02mm-25mm different diameter and 38mm-150mm length
Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you
3.OEM:Special Cutters Customized acceptable!Coated OEM also.We can
produceaccording to your drawing,too.Or the hot deisgned recommend
|4. HS Code reference for you to control everything:8207709000.|
|5. Mixed size and types in one batch available.|
|6. For distributor,we can label your brands on cutters and plastic box.|
1. We accept Mix coated in the same model number, Also one batch with
different coating and types.
|2. AlTiN,TiAlN,TiSiN,TiN,DLC,NANO for you to choose to win your competitors!|
|MOQ (Small Qty )||5-10-500-1000-5000-10000 pcs all are welcome. 5 pieces per order is MOQ.|
We package all our goods carefully.We also accept your packing design OEM
packing it for your control.
|Samples Service||1. Some items free samples for you.|
|2. Free samples but pay shipping cost.|
|3. Lowest shiping fee for you to choose.|
|4. Order to us,sample fee will be refund to you.|
|5. Become our VIP clients,free samples for you!|
|6.OEM samples are hot welcome.|
Q: Are you Manufacture?
A: Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q: What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Mr. huang
Tel: 0755-2765 4077