Product Details:
Payment & Shipping Terms:
|
Business Type: | Factory | Other Service: | OEM/ODM Or Custom-made |
---|---|---|---|
Diameter: | 0.4mm-20mm | Flutes: | 1 |
Usage: | General High Speed Cutting | PCD Blank: | Imported From DI ,E6 |
Business: | Factory | ||
High Light: | polycrystalline diamond cutters,polycrystalline diamond pcd tools |
Polycrystalline diamond milling cutter surface polishing processing precision carving batch pattern turning milling CD
overview
Joeben PCD milling cutter adopts the suitable negative front Angle design, taking into account the edge strength and sharpness, at the same time using the large core diameter, enhance the rigidity of the tool, make its cutting and chip removal more stable.Ultra-wide capacity chip removal has the function of strong cutting, more smooth chip discharge, high speed machining can be achieved, high precision and more luster of the workpiece.
Our diamond cutting tools not only wear resistance, and has good chip removal performance, is to achieve high efficiency, high brightness, high finish precision machining preferred.
Diamond polishing knife consists of two kinds of materials: PCD polycrystalline diamond rough polishing knife and ND natural diamond fine (fine) polishing knife, which are successively mounted in a special polishing knife plate. It can be used in diamond polishing machine, edge-grinding machine and CNC center or milling machine to finish rough and fine polishing of acrylic plate in one time.
The tool is composed of natural diamond (PCD) precision polishing knife, polishing effect is good, fine grain.It is the first choice for batch polishing, high efficiency, high yield and high brightness of organic plate.
1) in the process of processing different materials and knife selection to achieve different effects, it is recommended to use the tool with short edge as far as possible.Because the cutting edge is too long or the knife body is too long, it will cause the turning and deviation during processing, which will lead to the damage of the cutting tool and the quality of the processed products.
2) must use the appropriate size of the jacket, because of serious wear or not enough circle and inner hole with taper of the jacket, can not provide enough clamping force, resulting in vibration or twist the handle and fly off.
3) when uneven contact marks or grooves are found on the tool handle after the tool is clamped, it indicates slippage or deformation of the inner hole of the fixture.The jacket should be replaced immediately.The tool handle and jacket must be tightly tightened to prevent the handle from breaking or accidents.
4) keep the tool clean after work, using standard industrial solvents to remove dirt stuck to the tool.
5) do not change the type of tools or tools without permission, because every grinding process requires professional grinding equipment and professional grinding skills.Otherwise, it is easy to cause blade fracture and cause accidents.
1. Make products according to customers' samples, drawings and instructions to improve cooperation efficiency and accuracy.
2. Communicate clearly with our technical staff about the specific requirements of customers. We recommend suitable products according to your specific situation, so as to ensure the performance of products and reduce the cost at the same time.
3. The quality, size and production process difficulty of diamond determine the product price, the structure of diamond determines the use performance of the product, and the structure of the shank is made according to the installation requirements of the machine tool, so please choose the demand reasonably.
Processing features: strong stability, mirror highlights, smooth chip, reduce cutting resistance, improve machining efficiency and tool life.
The tool can be repeatedly grinding several times: the tool raw material USES the industry standard screening, to ensure the quality of the tool in the case of wear, no need to change the tool, our company provides grinding service, after our company's grinding tool, restore the former cutting quality, effectively save processing costs.
The single crystal diamond cutting tool has great brittleness, and the blade is very sharp, so it is easy to collapse when it is impacted. Therefore, it should be used in a balanced and vibration-free working condition as far as possible. At the same time, the rigidity of the workpiece and the cutting tool and the stiffness of the whole system should be improved as far as possible, so as to increase its seismic resistance.
The unequal u-shaped slot design makes the chip discharging space larger and smoother, suitable for large feeding cavity processing and end edge milling.Finishing, no Yin and Yang surface, vibration, bright line.
PCD Recommended Cutting Condition | |||
Work piece | Cutting Speed | Depth of Cut | Feed Rate |
(m/min) | (mm) | (mm/rev) | |
Aluminum(5~8% SI ) | 350~1600 | 0.05~2.50 | 0.10~0.40 |
Aluminum(8~12% SI ) | 350~1300 | 0.05~2.50 | 0.10~0.40 |
Aluminum(14~18% SI ) | 160~800 | 0.05~2.50 | 0.05~0.25 |
Copper | 350~1000 | 0.15~2.50 | 0.05~0.20 |
Sintered Carbid | 15~25 | 0.05~0.60 | 0.10~0.20 |
Glass Fiber | 100~800 | 0.15~0.50 | 0.03~0.25 |
Carbon | 160~700 | 0.15~2.50 | 0.15~0.40 |
High Aluminum | 70~250 | 0.05~1.50 | 0.03~0.15 |
Ceramics | |||
Wood | 1000-2500 | 0.2~5.0 | 010~0.50 |
Welcome and congratulations!You found us a professional factory! | |
Size & Design |
1.We not only supply all kinds of high quality solid carbide turning tool ,but also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw Blades and Milling cutter,There are diamond grinding wheel, diamond dressing tools and hardness head. |
2. We have 0.02mm-25mm different diameter and 38mm-150mm length Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you to choose. |
|
3.OEM:Special Cutters Customized acceptable!Coated OEM also.We can produceaccording to your drawing,too.Or the hot deisgned recommend to you. |
|
4. HS Code reference for you to control everything:8207709000. | |
5. Mixed size and types in one batch available. | |
6. For distributor,we can label your brands on cutters and plastic box. | |
Plating |
1. We accept Mix coated in the same model number, Also one batch with different coating and types. |
2. AlTiN,TiAlN,TiSiN,TiN,DLC,NANO for you to choose to win your competitors! | |
MOQ (Small Qty ) | 5-10-500-1000-5000-10000 pcs all are welcome. 5 pieces per order is MOQ. |
OEM One-Step Packing |
We package all our goods carefully.We also accept your packing design OEM packing it for your control. |
Samples Service | 1. Some items free samples for you. |
2. Free samples but pay shipping cost. | |
3. Lowest shiping fee for you to choose. | |
4. Order to us,sample fee will be refund to you. | |
5. Become our VIP clients,free samples for you! | |
6.OEM samples are hot welcome. |
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Our advantage:
ATTACTION:
Contact Person: Mr. huang
Tel: 0755-2765 4077
Fax: 86-0755-2765-6225