Payment & Shipping Terms:
|Overall Length:||35-100mm||Application:||CNC Process|
|Supply Ability:||100000 Piece/Pieces Per Month||Graininess:||0.8um|
|Suitable:||For Aluminum,aluminum Alloy,copper&non-ferrous Materials;|
monocrystalline diamond cutting tools,
industrial diamond cutting tools
Diamond cutter for aluminum,aluminum alloy,copper&non-ferrous materials CNC Process
MCD and diamond is of high hardness, high wear resistance and high heat transfer coefficient, and with natural diamond belongs to a single crystals, its not the nature of the grain boundary can create a very sharp blade quality, is out of reach for other materials, has long been used in the production of ultra precision machining of diamond cutters, polishing tools and abrasion resistant components.
The single crystal diamond cutting tool has great brittleness, and the blade is very sharp, so it is easy to collapse when it is impacted. Therefore, it should be used in a balanced and vibration-free working condition as far as possible. At the same time, the rigidity of the workpiece and the cutting tool and the stiffness of the whole system should be improved as far as possible, so as to increase its seismic resistance.
The higher cutting speed can reduce the cutting force, while the lower cutting speed can increase the cutting force, thus accelerating the cutting edge collapse failure.
It is necessary to avoid the contact between the single crystal diamond cutter and the workpiece or other hard objects in the static state, so as to prevent the cutting edge from being damaged and avoid stopping the machine without leaving the workpiece during cutting
The diamond knife blade is easily damaged. When the blade is not working, protect it with a rubber or plastic cap and keep it in a separate knife case
Maintenance of environment and machine performance stability and human proficiency have an impact on tool life.
Suitable for processing non-ferrous metals (copper, aluminum, zinc, titanium, etc.), as well as the end face and outer part of organic plate, high-precision arc of knife tip and experienced edge grinding process.
When mounted on a CNC machine with good stability, the machined surface of the plate can produce a mirror effect, and the smoothness can reach RA0.2 or above
1.Fully enables running at rough machining parameters, resulting in finish surface quality.
2.Excellent performance in machining titanium, stainless steel and high temperature alloys.
3.The coating provides longer tool-life or increased cutting-values.
4.Suitable for all types of steel or metal.
Original raw micro grain material, high hardness and T.R.S
a, Material: tungsten carbide
b, TRS: >3600 N/mm2
c, HRA: 91.8-92.4, HRC:45/55/60/65
d, Grain size: 0.2-0.6μm
e, Helix angle: 30°-45 °
Diameter of cutting edge: 0.2-0.9mm; 1-20mm
Size: Diameter 1.0mm-20mm standard and non-standard.
Cutting Form: Square,Ball nose, Corner Radius, Taper Flute, etc.
Type of flute: 2/3/4
|MCD Recommended Cutting Condition|
|Work piece||Cutting Speed||Depth of Cut||Feed Rate|
|Aluminum(5~8% SI )||350~1600||0.05~2.50||0.10~0.40|
|Aluminum(8~12% SI )||350~1300||0.05~2.50||0.10~0.40|
|Aluminum(14~18% SI )||160~800||0.05~2.50||0.05~0.25|
Single Crystal Natural &synthetic diamond cutting tools,inserts,drill Bits, Milling Cutter
1. This turning insert with natural diamond is widely used in ultra precise mirror turning, milling and cutting, etc.
Material: Single-Crystal Diamond (Mono-crystalline) &synthetic diamond
Accepted Delivery Terms: FOB,CNF,CIF
Accepted Payment Currency: USD, CNY
Accepted Payment Type: T/T, Western Union
Nearest Port: Guangzhou port, Shenzhen port, Shanghai port
Response Rate (last 30 days)
98.6% of buyers who contacted this supplier received a response within 24 hours.
The supplier's average response time of received inquiries is within 12 hours.
Quotation Performance (last 30 days)
The supplier have sent 33 quotes to buyers in last 30 days.
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Mr. huang
Tel: 0755-2765 4077