JOEBEN Monocrystalline Diamond Cutting Tools Crystal Polishing Faceting Cutter PCD CVD Blanks

JOEBEN Monocrystalline Diamond MCD Posalux tools crystal diamond polishing Faceting cutter PCD CVD blanks 

overview 

[Tool selection] reasonable selection of tools and maintenance, to facilitate the use of tools to play the efficiency, conducive to the use of tools and time, cost control, JOEBEN tools have the following Suggestions:

1, according to the structure of the processed products, materials and processing hardness to choose the appropriate tool type.

2. Check the power and stiffness of the machine so that the required tool diameter can be used on the machine.

3. The overhang of the cutter on the spindle should be as short as possible to reduce the impact of the cutter axis and the workpiece position on the impact load.

4, the use of suitable for the process of tool pitch, so that there is not too much blade and workpiece mesh and vibration, on the other hand, in the milling of narrow workpiece or milling cavity to keep the blade and workpiece mesh.

5, try to use the feed per blade, in order to get the cutting position when the chip thickness, so as to reduce tool wear.The indexable blade with front Angle groove is used to obtain stable cutting power.

6, choose suitable for the width of the workpiece tool diameter.

7, choose the appropriate main Angle.

8. Place each tool in a regular and orderly manner.

9, follow the rules of tool maintenance and repair, and monitor tool wear.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.