PCD Rough Finishing Monocrystal Diamond Cutting Tools MCD Polishing Cutter For Acrylic

Monocrystalline Diamonds MCD polishing tools cutter PCD rough finishing tool for Acrylic  

overview 

Large triangular groove, new circular arc blade, double edge belt, can process large hole on inclined surface without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, quickly improve cutting efficiency, rounded neck tolerance in about 0.001-0.005, international standard straight handle, processing can effectively inhibit chatter, the basis of these high quality.

The triangular bevel groove design of the blade is larger than the cutting amount, realizing the unprecedented high feed processing, the efficiency is increased by 200%, the precise chamfer profile is rounded and can effectively avoid the collision of the product, so that the full effect of the product blade.Double edge belt can effectively remove burrs, the surface of the hole processed is smooth, the tolerance range is small, it can be used instead of some coarse knives.

Spiral design, large capacity, smooth chip removal, prevent sticking knife, reduce heat, good cemented carbide compressive strength, high hardness, good wear resistance, round and smooth handle with precise chamfering clamping easier, complete specifications to meet the needs of a variety of aperture, support customization.

1.Fully enables running at rough machining parameters, resulting in finish surface quality.
2.Excellent performance in machining titanium, stainless steel and high temperature alloys.
3.The coating provides longer tool-life or increased cutting-values.
4.Suitable for all types of steel or metal.

Original raw micro grain material, high hardness and T.R.S

a, Material: tungsten carbide
b, TRS: >3600 N/mm2
c, HRA: 91.8-92.4, HRC:45/55/60/65
d, Grain size: 0.2-0.6μm
e, Helix angle: 30°-45 °

Diameter of cutting edge: 0.2-0.9mm; 1-20mm

Size: Diameter 1.0mm-20mm standard and non-standard.

Cutting Form: Square,Ball nose, Corner Radius, Taper Flute, etc.

Type of flute: 2/3/4

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.