CNC Process Monocrystal Diamond Cutting Tools High Gloss Effect No Blade With Mirror Effect

Monocrystal Diamond Cutting Tools high-precision high-gloss effect no blade with mirror effect                        

Diamond polishing knife is composed of two kinds of materials: PCD polycrystalline diamond rough polishing knife and ND natural diamond fine (fine) polishing knife, which are mounted in the special polishing knife plate in turn, and can be used for acrylic sheets in diamond polishing machine, edge grinding machine, CNC center (CNC) or milling machine and other equipment to complete rough and fine polishing at one time.

The tool is made up of natural diamond (PCD) polishing tool with fine grain and good polishing effect.Mature cutting tool grinding process, excellent chip removal performance, can be finished dozens of sheet polishing, is the current batch of organic polishing, grinding edge efficient, high yield, highlighting the preferred tool.

1) in the process of selecting knives for processing different materials and achieving different effects, it is suggested to use knives with short cutting edges as far as possible.Because the cutting edge is too long or the cutter body is too long, it will cause the whole movement and deviation during processing, which will lead to the damage of the cutting tool and the quality of the processed products.

2) be sure to use a suitable size of the jacket, because the wear is serious or not enough circle and the inner hole with a taper of the jacket, can not provide enough clamping force, resulting in vibration or twist off the handle and fly off.

3) when the tool holder is found to have uneven contact marks or grooves after the tool is clamped, it indicates that there is slippage or deformation of the inner hole of the fixture.Replace the jacket immediately.The tool handle and jacket must be fully tightened and firm to prevent the handle from breaking or causing accidents.

overview 

Single crystal diamond tool brittleness, the blade is very sharp, when the impact is easy to produce chipping edge, so as far as possible in the balance, no vibration of the working conditions, but also should be as far as possible to improve the rigidity of the workpiece and the tool and the whole system, increase its seismic capacity, cutting more than 0.05mm is appropriate.

High cutting speed can reduce the cutting force, while low speed cutting will increase the cutting force, so as to accelerate the tool chipping edge failure, so the cutting speed should not be too low when using single crystal diamond tool processing.

The contact between single crystal diamond cutter and workpiece or other hard objects in the static state should be avoided to prevent the cutting edge from being damaged and to avoid the stop of the cutting tool without leaving the workpiece

Diamond knife blade is easily damaged. When the blade is not working, protect it with rubber or plastic cap and place it in a separate knife box for safekeeping. Wipe the blade with alcohol before working.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.