Payment & Shipping Terms:
|Suitable For:||Carbon Steel||Precision:||High Precision|
|OEM&ODM:||Available||Other Service:||OEM/ODM Or Custom-made|
bull nose milling cutter,
carbide corner rounding cutter
CNC End Mill Cutter Factory Hot Sales For Cnc Used Tools Side Spiral Mill Cutter
Reasonable selection and maintenance of tools, to give play to the use efficiency of tools, to help the number and length of tool use, control costs, JOEBEN tools have
the following Suggestions:
1, according to the structure of the processing products, materials and machining hardness choose the appropriate tool type.
2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.
3. The overhang of the tool on the spindle should be as short as possible to reduce the impact load of the tool axis and the position of the workpiece.
4, the use of suitable for the process of the tool pitch, so that when cutting not too many blades and the workpiece at the same time and cause vibration, on the other hand, in the milling narrow workpiece or milling cavity to keep the blade and the workpiece mesh.
5, try to use the feed per blade, so as to get the cutting position when the chip thickness, so as to reduce tool wear.The front Angle grooved indexable blade is used to obtain smooth cutting power.
6, choose suitable for the width of the workpiece tool diameter.
7, choose the appropriate main Angle.
8. Place each cutter in an orderly manner.
9. Follow the rules of tool maintenance and repair, and monitor tool wear.
With toughness superhard abrasive machining hard and hard, hard machining the minimal consumption, can be directly below 50 degrees for heat treatment of materials for the rough machining to fine processing, reduce the changeover times, saves the production schedules, stable and reliable, and chip removal is fast, and can be a long time to maintain its sharpness and abrasive tool shape, can not only guarantee the accuracy of the workpiece, and greatly improve the machining efficiency, and solve the problem of environmental pollution.Extremely fine diamond material with high hardness can effectively cut burr, u-groove design at blade, large front Angle, effectively reduce cutting resistance, facilitate smooth chip removal and improve working efficiency under high precision.
|EDP No.||Dia(mm)||Angle||Flute Length(mm)||Flutes||Shank Dia(mm)||OverLength(mm)|
F-ED-001 end mill Features:
1. Suitable for steels & cast iron (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager