4 Flute Square CNC End Mill Cutter High Rigidity Smooth Chip Removal NOT Coating

CNC End Mill Cutter Factory Supplying 4 Flutes Square Fludes Half Roughing End Mills

overview 

       Compared with the previous year, the cutting amount of the blade triangular slant groove design is larger, realizing the unprecedented high feed processing, the efficiency is increased by 200%, the precise chamfering contour is round and can effectively avoid the product bruising, so that the full effect of the product blade can be exerted.Double edge belt effectively removes burrs, USES the processed hole surface smoothness, the tolerance range is small, may replace part of the rough knife to use.

       Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy compression strength, high hardness, good wear resistance, smooth handle with precise chamfering clamping more easily, complete specifications to meet the needs of a variety of apertures, support customization.

       Keeping its sharpness and shape for a long time can not only ensure the machining accuracy of workpiece, but also greatly improve the machining efficiency, and solve the environmental pollution problem at the same time.Extremely fine diamond material with high hardness can effectively cut burr, u-groove design at blade, large front Angle, effectively reduce cutting resistance, facilitate smooth chip removal and improve working efficiency under high precision.Welcome to choose Chopin cutter.

F-ED-001 end mill Features:

1. Suitable for steels & cast iron (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

   Using multifunctional superfine grain tungsten steel material has better wear resistance and strength to belong to high hardness, high speed milling cutter, cutting edge passivation treatment not only makes the blade intensity increase tool life, also can make in the later than no passivation cutting tool machining more smooth and bright, the handle end chamfering processing, make the clamping more easily, also reduce the cutter wear and tear of the fixture, ALTIN high aluminum titanium coating process so as to improve the machining efficiency, can increase the tool life under the same cutting speed, unique chip groove shape, even in the groove and in cavity type processing can show the excellent performance,Sharp cutting edge and large screw Angle design effectively prevent the generation of chip deposition, the seismic design of the whole edge, can inhibit the chatter in the process of processing, improve the quality of the processing surface, in order to get the best cutting surface and tool life, please be sure to use high precision, high rigidity, good dynamic balance of the tool holder clamp.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our  brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.