High Precision Chamfer Forming Milling Cutter 2 Blade Cutting Groove

Forming Milling Cutter China Wholesale Chamfering Solid Carbide Chamfer Endmill

    To belong to high hardness, high speed cutting application universal milling cutter, blade cover ALTIN nano coating, can on heat treatment of materials directly under 60 ° high-speed rough machining to finish machining, reduce the changeover times, improve efficiency, save the schedule.2 blade cutting groove is given priority to, 4 blade with lateral milling and face milling is given priority to, suggested that cutting HRC60 ° within the steel material.

     In order to obtain a better cutting surface and prolong the life of the milling cutter, it is necessary to use a tool handle with high precision, high rigidity and good dynamic balance.

     The shorter the length of the cutter extension chuck, the better. If the extension is longer, please adjust the speed, feed speed or cutting amount by yourself

      Suitable for hrc30-52 metal workpiece, the use of general good altin coating, the workpiece surface finish is better, the processing material versatility is more extensive, it is recommended to use high rigidity, high precision tool handle and barrel clip, comprehensive runout control within 0.005mm.Smooth chip removal design, enhance damage resistance, improve the processing surface finish,

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Super raw material

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

   NOTE: Before using the milling cutter, please test the tool deflection. If the accuracy is more than 0.01mm, please correct it before cutting

Selects fine grain quality bar, processing imported five axis tool grinding machine, cutting tool inspection standard strictly, to ensure the consistency of the cutter size and beating altin nano coating, resistant to high temperature wear resistance, hardness and toughness of the notification with coating, suitable for 63 ° hard steel, hardened steel, aluminum, copper materials, under the condition of the bits ensure the space, the big core diameter design, greatly enhance the tool rigidity and vibration resistance, reduce the cutting knife, prolong service life.Through passivation technology, the tool adhesion particles are completely removed, the edge passivation, processing high hardness material is more convenient, anti-breakage edge, prolong the service life of the tool.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.