Payment & Shipping Terms:
|Coating:||Customize Acceptable||Suitable For:||Carbon Steel|
chamfer milling cutter,
60 degree chamfer tool
Chamfer End Mill Cutter Factory Direct Supplier 60 Degree Chamfer Milling Cutter
chamfer mill Features:
1. Suitable for Aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool.
Large triangular groove, new arc edge, double edge belt, large hole can be machined on inclined surface without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.Large capacity smooth chip removal, prevent sticking knife, reduce heat, good hard alloy compressive strength, high hardness, good wear resistance, fruity and smooth handle with accurate chamfer clamping easier and improve the knives' service life under the same cutting speed, unique chip groove shape, even in the groove and in cavity type processing can show the excellent performance.
Super raw material
|YG10X||YG10.2 &WF25(Taiwan)||K44 & K40 (German)||H10F (Sweden)|
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager