Stainless Steel Chamfer Milling Cutter 58 Degrees Chamfer Tool Balchas Coating

Chamfer End Stainless steel special tungsten steel milling cutter 58 degrees machining cutter welcome to sample custom

    Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy compression strength, high hardness, good wear resistance, smooth handle with precise chamfering clamping more easily, complete specifications to meet the needs of a variety of apertures, support customization.

chamfer mill Features:

1. Suitable for Aluminum alloy (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Balchas coating is specially used for hard alloy steel, fine rough hard steel and hard material of high performance coating, especially suitable for HRC60 above hardened steel.

Professional custom cutting cutter of all kinds, professional processing and application to create a whole series of carbide vertical milling cutter, with the advantages of flexibility, high speed and economic benefits, in order to provide excellent cost performance

Compared with the previous year, the cutting amount of the blade triangular slant groove design is larger, realizing the unprecedented high feed processing, the efficiency is increased by 200%, the precise chamfering contour is round and can effectively avoid the product bruising, so that the full effect of the product blade can be exerted.Double edge belt effectively removes burrs, USES the processed hole surface smoothness, the tolerance range is small, may replace part of the rough knife to use.Altin coating is widely used, the workpiece surface finish is better, the processing material versatility is wider, it is recommended to use high rigidity, high precision tool handle and barrel clip, comprehensive pulsating control within 0.005mm.Smooth chip removal design, enhance the resistance to damage, improve the surface finish.

Super raw material

Super coating

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.