Payment & Shipping Terms:
|Material:||Tungsten Steel||Coating:||Balchas Coating|
|Precision:||High Precision||Usage:||General High Speed Cutting|
chamfer milling cutter,
chamfer tool milling cutter
Chamfer End Mill Cutter Manufacturers direct 55 degrees four - edged tungsten steel milling cutter carbide CNC cutter
Suitable for 63 ° hard steel, hardened steel, aluminum, copper materials, under the condition of the chip guarantee the space, the big core diameter design, greatly enhance the tool rigidity and vibration resistance, reduce the cutting knife, prolong service life.Through passivation technology, the tool adhesion particles are completely removed, the edge passivation, processing high hardness material is more convenient, anti-breakage edge, prolong the service life of the tool.
Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool
Large triangular groove, new arc edge, double edge belt, large hole can be machined on inclined surface without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.Balchas coating is specially used for hard alloy steel, fine rough hard steel and hard material of high performance coating, especially suitable for HRC60 above hardened steel.
chamfer mill Features:
1. Suitable for Aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Super raw material
|YG10X||YG10.2 &WF25(Taiwan)||K44 & K40 (German)||H10F (Sweden)|
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN“brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Mr. huang
Tel: 0755-2765 4077