Payment & Shipping Terms:
|Diameter:||D2-20MM||Other Service:||OEM/ODM Or Custom-made|
|Workpiece:||Aluminum, Acrylic||Overall Length:||50-100mm|
ball nose milling cutter,
ball nose end mill cutter
Carbide Ball End Mill Top Quality Tungsten Carbide Taper Ball Nose End Mill
Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.Balchas coating is specially used for hard alloy steel, fine rough hard steel and hard material of high performance coating, especially suitable for HRC60 above hardened steel.
The use of multifunctional ultra-fine grain tungsten steel base material has better wear resistance and strength dedicated to high hardness high-speed cutting cutter, edge passivation treatment not only makes the edge strength to enhance the life of the tool, but also can make in the later processing than no passivation tool processing more smooth and bright.
The tool holder tail is chamfered to make clamping easier and reduce tool wear. ALTIN coating process is adopted to improve cutting efficiency and improve tool life at the same cutting speed.
Unique chip groove shape, even in the groove and cavity machining can show excellent performance, sharp cutting edge and large screw Angle design effectively prevent the generation of chip, the whole cutting edge seismic design, can inhibit the process of the chatter vibration, improve the quality of processing surface, in order to get the best cutting surface and tool life.
|YG10X||YG10.2 &WF25||Germany K44 & K40||Sandvik H10F|
|EDP No.||Dia(mm)||Angle||Flute Length(mm)||Flutes||Shank Dia(mm)||OverLength(mm)|
F-ED-001 end mill Features:
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager