overview

PCD diamond tool: Natural diamond is expensive, diamond is widely used in cutting or polycrystalline diamond (PCD), since the early 1970s, the use of high temperature and high pressure synthesis technology prepared polycrystalline diamond (Polycrystauine diamond, referred to as PCD blade after the successful development of In many cases, natural diamond tools have been replaced by artificial polycrystalline diamond. PCD raw materials are abundant, and its price is only one-tenth to one-tenth of natural diamond. PCD tool can not grind out extremely sharp edge, the surface quality of the workpiece processing is not as good as the natural for non-ferrous metals and non-metallic fine cutting, it is difficult to achieve ultra-precision mirror cutting.

Application scope of natural diamond milling cutter: hardware parts; Auto parts; Surface treatment; Craft products; Fine carving; Copper batch flower; Mobile phone metal keys; Mobile phone case; Digital shell; Metal highlight batch flower; Watch surface, word nail; The case reflects the knife; Nameplate, sign highlight batch flower; Car CD pattern; Car colorful pattern; Car sun pattern; Aluminum products highlight; Electrical shell batch flower; Electrical panel; Vehicle panel; Computer peripherals; Transparent computer case; Acrylic polishing; Compression (plexiglass) highlight (polishing) chamfer; A lens; Windows; Motor rectifier fine car, etc. Mainly used for all kinds of metals, gold, silver, copper, aluminum alloy, zinc alloy and non-metallic materials, acrylic, PVC, PC, plastic and other materials of high light chamfering and straight edge mark light cutting, cutting surface bright mirror highlight effect, long service life. According to the requirements of customized tool tip diamond width, Angle, material, tool bar size. R Angle arc can be controlled in 0.02-0.05, chamfering knife commonly used specifications in 45°, 75°, 78°, diamond width is 3.0* 3.0mm.
Processing features: strong stability, specular highlight, smooth chip, reduce cutting resistance, improve processing efficiency and tool life.
Cutting tool can be repeatedly grinding several times: cutting tool raw materials using industry standards screening, to ensure that the quality of the tool in the appearance of wear, no need to change the tool, our company provides grinding services, after our company grinding the tool, restore the cutting quality of the past, effectively save the processing cost.
Single crystal diamond tool brittleness is large, the blade is very sharp, when the impact is easy to produce collapse edge, so as far as possible in the balance, no vibration of the working conditions to use, but also should be as far as possible to improve the rigidity of the workpiece and tool and the rigidity of the whole system, increase its seismic capacity, cutting dosage below more than 0.05mm is appropriate.
High cutting speed can reduce the cutting force, while low cutting speed can increase the cutting force, thus accelerating the tool collapse failure. Therefore, the cutting speed should not be too low when using single crystal diamond tool.
It's used to machine wide range materials such as nonferrous metal,likeAluminum,Aluminum Alloy,Copper,Copper Alloy,Tungsten Carbide,Wood,Reinforced Plastic,Rubber,Graphite,Composite Material,Carbon Fiber,Glass Fiber,Composite Ceramic ect....

• Suitable for workpiece : Carbon Steel, Aluminium alloy, Cuprum, Acrylic
• HRC:  45/55/60/65 HRC ,After quench, for processing large hardness of 150°
• Other Service:  OEM/ODM or custom-made
• Effect:   cut aluminum parts in large area, saving time and labor
• Machining parts:Outer circle and inner circle of turning parts

 
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
 
Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.