overview

Natural diamond tools are mainly used in copper and copper alloys and gold, silver, rhodium and other precious non-ferrous metals, as well as special parts of the ultra-precision mirror processing, such as camera disk, optical plane mirror, multifaceted mirror and quadric mirror. But its crystal anisotropy, the tool price is expensive. It is mainly used for turning and processing various non-ferrous metals such as aluminum, copper, magnesium and its alloys, hard alloy and fiber plasticized materials with strong wear resistance, metal matrix composite materials, wood and other non-metallic materials. The cutting speed, feed speed and depth of cutting depend on the workpiece material and hardness. Because there are some residual bonded metals and graphite among diamond particles, the bonded metals in the coalescence state or veined distribution will reduce the wear resistance and life of the tool. In addition, there are residual solvent metals, which are in direct contact with the diamond surface. The oxidation resistance and heat resistance temperature of the tool are reduced, so the cutting performance of the tool is not stable. The preparation process of diamond thick film cutting tools is complicated because of the high interfacial energy between diamond and low melting point metals and their alloys. Diamond is difficult to infiltrate by common low melting point solder alloys. TDF welding tool can not be used in high speed milling because of poor weldability. Diamond coated cutter can be applied to high-speed machining, because in addition to the excellent mechanical properties of diamond coated cutter, diamond coated process can prepare any complex shape milling cutter for high-speed machining, such as aluminum and titanium alloy aviation materials and difficult to process non-metallic materials such as graphite electrodes.

[Tool selection] Reasonable selection and maintenance of tools to facilitate the use of tools efficiency, conducive to the use of tools times and duration, cost control, JOEBEN tool has the following suggestions:
1, according to the structure of the processed product, material and processing hardness of the appropriate tool type.
2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.
3. The overhang of the tool on the spindle should be as short as possible to reduce the impact of the tool axis and the position of the workpiece on the impact load.
4, the use of suitable for the process of tool pitch, so that when cutting without too much blade and workpiece meshing caused by vibration, on the other hand, in milling narrow workpiece or milling cavity to keep the blade and workpiece meshing.
5, try to use the feed per blade, so as to obtain the cutting position when the chip is thick, so as to reduce the tool wear. The indexable blade with positive front Angle groove is used to obtain smooth cutting power.
6, choose suitable for the workpiece width of the tool diameter.
7, choose the appropriate main deflection Angle.
8. Place each tool in a regular and orderly manner.
9. Follow the rules of tool maintenance and repair, and monitor tool wear condition.
With super hard abrasive processing hard brittle and hard toughness difficult processing workpiece, its consumption is very small, heat treatment materials below 50 degrees directly high-speed rough processing to fine processing, reduce the number of tool change, save the production time, stable and reliable, fast chip removal, and can maintain its sharpness and abrasive shape for a long time, not only can ensure the machining accuracy of the workpiece, And greatly improve the processing efficiency, while solving the problem of environmental pollution. Ultra-fine and high hardness diamond material, to ensure high precision, effective cutting burr, U-shaped groove design at the blade, large front Angle, effectively reduce cutting resistance, convenient and smooth chip removal, improve work efficiency. Welcome to Joben.

1, long use time, sharp cutting edge design, combined with new coating treatment, the tool is not easy to wear;
2, the choice is large, the same blade diameter, there are a variety of different blade length and length, convenient for different degrees of processing speed needs and processing distance needs;
3, a wide range of processing materials, for cast iron, stainless steel, carbon steel, hardened steel, graphite, composite materials, acrylic and other materials with different hardness precision machining;
4, not easy to break the knife, the blade adopts scientific structure design, maximize the rigidity and strength of the blade;
5, high processing efficiency, designed for precision and speed milling processing;
6, suitable for machine tools, joeben CNC tool can be used in CNC, computer gong, engraving machine, CNC lathe or other machine tools;

• Suitable for workpiece : Carbon Steel, Aluminium alloy, Cuprum, Acrylic
• HRC:  45/55/60/65 HRC ,After quench, for processing large hardness of 150°
• Other Service:  OEM/ODM or custom-made
• Effect:   cut aluminum parts in large area, saving time and labor
• Machining parts:Outer circle and inner circle of turning parts

 
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
 
Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.