Product Details:
Payment & Shipping Terms:
|
Diameter: | D2-20MM | Suitable For: | Acrylic, PVC, PC, PET, PMMA, Gold, Silver |
---|---|---|---|
Shank Diameter: | 6mm/8mm/10mm/12mm | OEM: | Acceptable |
DELIVERY TIME: | 3-7 Working Days | Precision: | High Precision, High Finish |
Material: | Carbide, Carbide, Carbide Rod, PCD Diamond Material | ||
High Light: | Custom PCD End Mill Cutter,20MM PCD End Mill Cutter,Router End Mill Bits For Aluminum |
overview
Application of diamond cutting tools
1) In the processing of different materials, to achieve different results in the process of knife selection, it is recommended to use the tool with short edge as far as possible. Because the cutting edge is too long or the tool body is too long, it will cause the adjustment and deviation during processing, which leads to the damage of the tool and the quality of the processed product.
2) Be sure to use the appropriate size of the jacket, due to serious wear or not round enough and the inner hole with taper jacket, can not provide enough clamping force, resulting in vibration or broken shank and fly off.
3) When uneven contact marks or grooves are found on the tool handle after clamping, it indicates that there is slippage or deformation of the hole in the fixture. The jacket should be replaced immediately. Tool handle and jacket must be fully tightened firmly, in order to cause the tool handle fracture or accident.
4) Keep the tool clean after work, and use standard industrial solvents to remove the dirt stuck on the tool.
5) Do not arbitrarily from the sharpening tool and change the tool type, because every grinding process needs professional grinding equipment and professional grinding skills. Otherwise, it is easy to cause knife edge fracture, resulting in accidents.
Diamond tool brittleness is large, the blade is very sharp, when the impact is easy to produce collapse edge, so as far as possible in the balance, no vibration of the working conditions to use, but also should be as far as possible to improve the rigidity of the workpiece and tool and the rigidity of the whole system, increase its seismic capacity, cutting dosage below more than 0.05mm is appropriate.
High cutting speed can reduce the cutting force, while low cutting speed can increase the cutting force, thus accelerating the tool collapse failure. Therefore, the cutting speed should not be too low when using single crystal diamond tool.
Avoid contact between the single crystal diamond tool and the workpiece or other hard objects in the static state, so as to prevent injury to the cutting edge and avoid shutdown when the tool does not leave the workpiece
Diamond knife blade is easy to damage, when the blade does not work with rubber or plastic cap to protect the blade and put in a separate knife box for storage, before each use with alcohol to clean the blade before working
Maintain the environment and machine performance stability, personnel operating proficiency, etc., have an impact on the life of the tool.
The disadvantage of diamond tool is poor thermal stability. When the cutting temperature exceeds 700℃ ~ 800℃, it will completely lose its hardness. In addition, it is not suitable for cutting ferrous metals, because diamond (carbon) at high temperatures tend to interact with iron atoms, causing carbon atoms to change into graphite
The handle chamfer layout is easier to clamp and the laser marking quality of the handle is more guaranteed.
Mainly used in the following industries:
1. Optical lens industry, such as: camera lens, traffic recorder lens, telephoto lens, medical mechanical lens, mobile phone lens, projector lens, (non) spherical lens and Fresnel lens mold processing, Fresnel lens.
2, glasses industry: glasses lenses, contact lenses.
3. Digital electronics industry: ROLL core and flat core processing of optical film for LCD core accessories of TV and computer, mirror on the outer edge of mobile phone, mirror on the key button of mobile phone, mirror on the outer edge of mobile phone flashlight.
4. Automobile industry: HUD system, night driving optical system, piston, aluminum wheel hub, aluminum engine cylinder block and other core parts processing of automobile manufacturing industry.
5, aerospace industry: night flight special protective glasses, aircraft window.
6. Medical industry: blood analysis package, and knife for fine surgery.
7. Military industry
Product Name | PCD/CBN/MCD/ND Inserts High Quality Diamond Inserts |
Suitable Material | Gold/Silve/Aluminum/Brass/Acrylic/Plastic/PVC/MDF/Steel |
Type | PCD/ MCD/ ND/ CVD/ CBN |
Features | No burs, high precision, good surface effects and high cutting efficiency and long work time |
Advantages | Factory direct sales, short delivery time; non-standard customization, quality assurance; attentive service, customer first |
Brand | Joeben |
Welcome and congratulations!You found us a professional factory! | |
Size & Design |
1.We not only supply all kinds of high quality solid carbide turning tool ,but also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw Blades and Milling cutter,There are diamond grinding wheel, diamond dressing tools and hardness head. |
2. We have 0.02mm-25mm different diameter and 38mm-150mm length Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you to choose. |
|
3.OEM:Special Cutters Customized acceptable!Coated OEM also.We can produceaccording to your drawing,too.Or the hot deisgned recommend to you. |
|
4. HS Code reference for you to control everything:8207709000. | |
5. Mixed size and types in one batch available. | |
6. For distributor,we can label your brands on cutters and plastic box. | |
Plating |
1. We accept Mix coated in the same model number, Also one batch with different coating and types. |
2. AlTiN,TiAlN,TiSiN,TiN,DLC,NANO for you to choose to win your competitors! | |
MOQ (Small Qty ) | 5-10-500-1000-5000-10000 pcs all are welcome. 5 pieces per order is MOQ. |
OEM One-Step Packing |
We package all our goods carefully.We also accept your packing design OEM packing it for your control. |
Samples Service | 1. Some items free samples for you. |
2. Free samples but pay shipping cost. | |
3. Lowest shiping fee for you to choose. | |
4. Order to us,sample fee will be refund to you. | |
5. Become our VIP clients,free samples for you! | |
6.OEM samples are hot welcome. |
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Our advantage:
ATTACTION:
Contact Person: Mr. huang
Tel: 0755-2765 4077
Fax: 86-0755-2765-6225