High Speed Straight Taper Shank Reamer Tapered Drill Reamer 35-100 Mm Overall Length

Solid Carbide Reamers High Quality Solid Carbide Straight Shank Spiral Flute Reamer

       Solid carbide, a cutting center, including 60 ° Angle, dovetail cutter.Designed and engineered for superior fracture strength and exceptional machining versatility when milling full dovetail slots with drop hole allowance.Angular radius improves tool strength and rigidity.Tight tolerances are manufactured to ensure final accuracy and performance.Each blade/tip has a unique mirror finish that improves surface finish while significantly increasing material removal.

    U-shaped groove design at the blade and large front Angle can effectively reduce cutting resistance, facilitate smooth chip removal and improve working efficiency.

      With toughness superhard abrasive machining hard and hard, hard machining the minimal consumption, can be directly below 50 degrees for heat treatment of materials for the rough machining to fine processing, reduce the changeover times, saves the production schedules, stable and reliable,

     chip removal is fast, and can be a long time to maintain its sharpness and abrasive tool shape, can not only guarantee the accuracy of the workpiece, and greatly improve the machining efficiency, and solve the problem of environmental pollution.Extremely fine diamond material with high hardness can effectively cut burr with high precision.Welcome to choose Chopin cutter.

Super raw material

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

JOEBEN solid cemented carbide cutters are characterized by more than fine grain quality.Their substrate is in its own class, thanks to an exclusive processing process that allows for greatly improved speed and feed rate.In the past 10 years, JOEBEN has been a well-known leader in the industry and enjoys an international reputation in the field of cemented carbide moulds.

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.