Payment & Shipping Terms:
|Place Of Origin:||Guangdong, China (Mainland)||Diameter:||D2-20MM|
|Other Service:||OEM/ODM Or Custom-made||Workpiece:||Aluminum, Acrylic|
ball nose milling cutter,
ball nose end mill cutter
Carbide Ball End Mill Factory price fresas cnc ball end mill Exported to Worldwide
Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool
Triangle large groove, new arc blade, double edge belt, can be machined on the surface of inclined Angle, without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.It is specially used for high performance coating of hard alloy steel, fine rough hard steel and hard material, especially for hardened steel above HRC60.
Professional custom cutting cutter of all kinds, professional processing and application to create a whole carbide endmill series, with flexibility, high-speed and economic advantages.
Unique chip holding groove shape, even in groove and cavity processing can show excellent performance, sharp cutting edge and large screw Angle design effectively prevent the generation of chip.
[strict quality] German ZOLLER tool testing instruments and systems are adopted. Hundreds of tests are adopted to control the same parameters of each type of tool and each batch of production, and the tools flowing to the market are qualified.
[tool selection] reasonable selection and maintenance of the tool, which is conducive to the use of the tool efficiency, the number and length of use of the tool, control cost, JOEBEN tools have the following Suggestions:
1, according to the structure of the processing products, materials and machining hardness choose the appropriate tool type.
2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.
3. The overhang of the tool on the spindle should be as short as possible to reduce the impact load of the tool axis and the position of the workpiece.
4, the use of suitable for the process of the tool pitch, so that when cutting not too many blades and the workpiece at the same time and cause vibration, on the other hand, in the milling narrow workpiece or milling cavity to keep the blade and the workpiece mesh.
5, try to use the feed per blade, so as to get the cutting position when the chip thickness, so as to reduce tool wear.The front Angle grooved indexable blade is used to obtain smooth cutting power.
6, choose suitable for the width of the workpiece tool diameter.
|YG10X||YG10.2 &WF25||Germany K44 & K40||H10F|
|EDP No.||Dia(mm)||Angle||Flute Length(mm)||Flutes||Shank Dia(mm)||OverLength(mm)|
F-ED-001 end mill Features:
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Mr. huang
Tel: 0755-2765 4077