Auto Radius Carbide Ball End Mill High Performance Carbide Milling Tools

Carbide Ball End Mill For Auto Radius Key Slot Cutter The Two Flute Cutting Tool

overview 

       Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool.   

Triangle large groove, new arc blade, double edge belt, can be machined on the surface of inclined Angle, without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.It is specially used for high performance coating of hard alloy steel, fine rough hard steel and hard material, especially for hardened steel above HRC60.

Professional processing and application to create a whole series of carbide endmill, with flexibility, high-speed and economic advantages.

     Compared with the previous year, the cutting amount of the blade triangular slant groove design is larger, realizing the unprecedented high feed processing, the efficiency is increased by 200%, the precise chamfering contour is round and can effectively avoid the product bruising, so that the full effect of the product blade can be exerted.Double edge belt effectively removes burrs, USES the processed hole surface smoothness, the tolerance range is small, may replace part of the rough knife to use.

   Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy good compressive strength, high hardness, good wear resistance.

    Unique chip groove shape, even in the groove and cavity machining can show excellent performance, sharp cutting edge and large screw Angle design effectively prevent the generation of chip, the whole cutting edge seismic design, can inhibit the process of the chatter vibration, improve the quality of processing surface, in order to get the best cutting surface and tool life.

F-ED-001 end mill Features:

1. Suitable for aluminum alloy (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

End Mill Tool material composition:

1. Physical Properties:

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

• Other Service:  OEM/ODM or custom-made
• Machining parts:Outer circle and inner circle of turning parts
• Product composition:Tungsten steel

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.