CNC Machining HRC45 T Slot End Mill Cutter Multi - Edged For Dry Cutting

T-Slot End Mill Cutter CNC machining T groove carbide cutter milling cutter wholesale

Super raw material

       T-Slot End Mill Cutter are usually 3-edged or 4-edged and multi-edged, mainly used for CNC, computer gong, precision engraving machine, CNC lathe, automatic lathe or other machine tools on the workpiece precision machining tools.It has the characteristics of high machining efficiency, fast machining speed, high machining precision, good surface roughness of workpiece, high chip guide, high feed, long service time and so on. It is suitable for dry cutting and cooling cutting.

Product composition:Tungsten steelF-ED-001 end mill Features

1. Suitable for aluminum alloy (≤ 65 HRC)

2. High performance alcr series coating,high temperature resistance and high wear resistance.

3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.

      [tool selection] reasonable selection and maintenance of tools, easy to play the efficiency of tool use, conducive to the number and length of tool use, cost control, shenbing tools have the following Suggestions:

1, according to the structure of the processing products, materials and hardness of the appropriate tool type.

2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.

3. The overhang of the tool on the spindle should be as short as possible to reduce the impact load of the tool axis and the position of the workpiece.

4, the use of suitable for the process of tool tooth spacing, so that there is not too much cutting blade and the workpiece at the same time and cause vibration, on the other hand, in the milling narrow workpiece or milling cavity to maintain the blade and the workpiece mesh.

5, try to use the feed per blade, so as to get the cutting position when the chip thickness, so as to reduce tool wear.The front Angle grooved indexable blade is used to obtain smooth cutting power.

6, choose suitable for the width of the workpiece tool diameter.

7, choose the appropriate main Angle.

8. Place each tool in an orderly manner.

9. Follow the rules of tool maintenance and repair, and monitor tool wear.

1. Physical Properties:overview

a. Hardness greater than or equal to 92.6 HRA;

b. Density greater than or equal to 14.4g/cm³;

c. TRS greater than or equal to 3800 N/mm²;

d. Free of ETA phase condition;

e. No contamination by other materials;

f. Porosity = A02/ B00 / C00 ;

g. Uniform and consistent grain size. No grain size can be larger than specified.

h. Chromium carbide grain growth inhibitor only.

2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;

3. It's proposed cutting less than 65HRC;

Q:Are you Manufacture?

A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.

We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.

Q: What is your delivery time?

A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.

Q: Can you produce non-standard tools?

A: Yes, we can produce non-standard tools as per your drawing.

We also can design tools for you as per your usage requirement

Q:What is your advantages?

A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.

Our advantage:

• 1. 10 years experience in carbide roll and cutting tool manufacturing
• 2. From row material to tool produdtion.
• 3. World top level prodution equipment and rich experience team

ATTACTION:

• 1.Make sure work piece and machine are stable and use a precision holder.
• 2.Please adjust the speed,feed and cutting depth according to actual cutting conditions.
• 3.The milling conditions are for an end mill where the tool overhang length is less than 4*D(mill diameter). When the tool overhang length is longer, please adjust the speed,feed and cutting depth.