|
Product Details:
Payment & Shipping Terms:
|
| Overall Length: | 35-100mm | Diameter: | D4-20MM |
|---|---|---|---|
| Coating: | Balchas Coating、Customize Acceptable | Sample Order: | Accepte |
| Certification: | ISO&SGS | Product Composition: | Tungsten Steel |
| High Light: | tungsten carbide reamer,taper shank reamer |
||
Solid Carbide Reamers CNC Cutting HRC55 CNC Tungsten Carbide step Reamer
Balchas coating is a high performance coating specially used for hard alloy steel, fine roughing hard steel and refractory materials, especially for hardened steel above HRC60.
Professional custom cutting cutter of all kinds, professional processing and application to create the whole carbide endmill series, with flexibility, high-speed and economic advantages, aimed at providing excellent cost performance
Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy compressive strength, high hardness, good wear resistance, smooth handle with precise chamfering clamping more easily, complete specifications to meet the needs of a variety of aperture, support customization.
| Item | AlTiN | TiAIN | TiSiN | nACo |
| Hardness(HV) | 3200 | 2800 | 3600 | 42(GPA) |
| Thickness(UM) | 2.5-3 | 2.5-3 | 3 | 3 |
| Oxidation Temp(°) | 900 | 800 | 1000 | 1200 |
| Friction Coeffient | 0.3 | 0.3 | 0.45 | 0.4 |
| Color | Black | Violet | Copper | Blue |
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
| EDP No. | Dia(mm) | Angle | Flute Length(mm) | Flutes | Shank Dia(mm) | OverLength(mm) |
| 2207010605 | 0.4 | 90 | 8 | 2 | 4 | 45 |
| 2207010229 | 0.5 | 127 | 0.87 | 2 | 4 | 50 |
| 2207010160 | 0.5 | 90 | 5 | 2 | 4 | 50 |
| 2207010342 | 1 | 71 | 9.94 | 2 | 4 | 50 |
| 2207010089 | 1 | 90 | 5.00 | 2 | 4 | 50 |
| 2207010085 | 1.2 | 120 | 5 | 2 | 4 | 50 |
| 2207010606 | 1.2 | 90 | 5.0 | 2 | 4 | 50 |
1. Physical Properties:overview
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Compared with the previous design, the cutting amount of the blade's triangle slant groove is larger, realizing the unprecedented high feed processing, increasing the efficiency by 200%. The precise chamfered contour is round and round, which can effectively avoid the product's bruising and give full play to the full effect of the product's blade.Double blade belt can eliminate burr effectively, the hole surface is smooth and the tolerance range is small.
The handle end chamfering processing, make the clamping more easily, also reduce the cutter wear and tear of the fixture, ALTIN high aluminum titanium coating process so as to improve the machining efficiency, can increase the tool life under the same cutting speed, unique chip groove shape, even in the groove and in cavity type processing can also show the excellent performance, sharp cutting edges, and a large spiral Angle design effectively prevent the formation of the devolop, blade seismic design, all can restrain chatter vibration in the process of machining vibration, improve the quality of processing surface.
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Our advantage:
ATTACTION:
Contact Person: Mr. huang
Tel: 0755-2765 4077
Fax: 86-0755-2765-6225
