Payment & Shipping Terms:
|Size:||R6||Suitable For:||Aluminum Alloy|
|Usage:||General High Speed Cutting||Accepted Delivery Terms:||FOB、CNF、CIF|
monocrystalline diamond cutting tools,
industrial diamond cutting tools
Diamond milling tools for diamond milling tools manufacturer for outlet diamond ball tools for jewelry making for cnc
1) in the process of processing different materials and knife selection to achieve different effects, it is recommended to use the tool with short edge as far as possible.Because the cutting edge is too long or the knife body is too long, it will cause the turning and deviation during processing, which will lead to the damage of the cutting tool and the quality of the processed products.
2) must use the appropriate size of the jacket, because of serious wear or not enough circle and inner hole with taper of the jacket, can not provide enough clamping force, resulting in vibration or twist the handle and fly off.
3) when uneven contact marks or grooves are found on the tool handle after the tool is clamped, it indicates slippage or deformation of the inner hole of the fixture.The jacket should be replaced immediately.The tool handle and jacket must be tightly tightened to prevent the handle from breaking or accidents.
MCD and diamond is of high hardness, high wear resistance and high heat transfer coefficient, and with natural diamond belongs to a single crystals, its not the nature of the grain boundary can create a very sharp blade quality, is out of reach for other materials, has long been used in the production of ultra precision machining of diamond cutters, polishing tools and abrasion resistant components.
Diamond polishing knife consists of two kinds of materials: PCD polycrystalline diamond rough polishing knife and ND natural diamond fine (fine) polishing knife, which are successively mounted in a special polishing knife plate. It can be used in diamond polishing machine, edge-grinding machine and CNC center or milling machine to finish rough and fine polishing of acrylic plate in one time.
The tool is composed of natural diamond (PCD) precision polishing knife, polishing effect is good, fine grain.It is the first choice for batch polishing, high efficiency, high yield and high brightness of organic plate.
MCD has the same high hardness, high abrasion resistance and high thermal conductivity as diamond, and is a single crystal as natural diamond. Its amorphous property can produce very sharp blade quality.
In the processing of different materials, to achieve different effects of the knife selection process, it is recommended to use the short edge of the knife.Because the cutting edge is too long or the knife body is too long, it will cause the turning and deviation during processing, which will lead to the damage of the cutting tool and the quality of the processed products.Be sure to use the right size of the jacket, because of wear or not enough circle and inner hole with taper of the jacket, can not provide enough clamping force, leading to vibration or twist the handle and fly off.
|MCD Recommended Cutting Condition|
|Work piece||Cutting Speed||Depth of Cut||Feed Rate|
|Aluminum(5~8% SI )||350~1600||0.05~2.50||0.10~0.40|
|Aluminum(8~12% SI )||350~1300||0.05~2.50||0.10~0.40|
|Aluminum(14~18% SI )||160~800||0.05~2.50||0.05~0.25|
|Welcome and congratulations!You found us a professional factory!|
|Size & Design||
1.We not only supply all kinds of high quality solid carbide turning tool ,but
also different types of Drill Bits,Reamers,Tool Holders,Cutter Heads,Saw
Blades and Milling cutter,There are diamond grinding wheel, diamond dressing tools and hardness head.
2. We have 0.02mm-25mm different diameter and 38mm-150mm length
Milling Cutters for your winner market.HRC45/55/60/65 ,1-6 flutes for you
3.OEM:Special Cutters Customized acceptable!Coated OEM also.We can
produceaccording to your drawing,too.Or the hot deisgned recommend
|4. HS Code reference for you to control everything:8207709000.|
|5. Mixed size and types in one batch available.|
|6. For distributor,we can label your brands on cutters and plastic box.|
1. We accept Mix coated in the same model number, Also one batch with
different coating and types.
|2. AlTiN,TiAlN,TiSiN,TiN,DLC,NANO for you to choose to win your competitors!|
|MOQ (Small Qty )||5-10-500-1000-5000-10000 pcs all are welcome. 5 pieces per order is MOQ.|
We package all our goods carefully.We also accept your packing design OEM
packing it for your control.
|Samples Service||1. Some items free samples for you.|
|2. Free samples but pay shipping cost.|
|3. Lowest shiping fee for you to choose.|
|4. Order to us,sample fee will be refund to you.|
|5. Become our VIP clients,free samples for you!|
|6.OEM samples are hot welcome.|
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager