Payment & Shipping Terms:
|Place Of Origin:||Guangdong, China (Mainland)||Overall Length:||35-100mm|
corner rounding milling cutters,
bull nose milling cutter
Edge Carbide HRC 60 degree integral tungsten steel four-edge nose milling cutter round nose milling cutter
1. This type of milling cutter is for aluminum alloy processing, has 2 / 3 flutes, flat and ball nose, without coating.
2. As the aluminum is softer, require high speed cutting. And our end mills for aluminum is single margin design, edge-line is very sharp, coating will make it dull. Besides, coating will lead to sticking to the cutters.
3. Milling cutter for aluminum owned good chipping discharge, suitable for high speed and large scale cutting.
4. Except carbide milling cutters, we produce other types products, such as drill, milling chuck, milling cutters, cutter heads, boring cutters, carbide inserts, etc.
5. Our products passing ISO9001:2015 certification, and we offer OEM and custom-made services. Any requirements, please contact us any time! Thank
Blade cover ALTIN nano coating, can on heat treatment of materials directly under 60 °
high-speed rough machining to finish machining, reduce the changeover times, improve efficiency, save the schedule.2 blade cutting groove is given priority to, 4 blade with lateral milling and face milling is given priority to, suggested that cutting HRC60 ° or less steel materials,
large triangle groove, the new circular blade, double belt, can produce large holes in the surface of the slope Angle, without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.Balchas coating is specially used for hard alloy steel, fine rough hard steel and hard material of high performance coating, especially suitable for HRC60 above hardened steel.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager