Payment & Shipping Terms:
|Place Of Origin:||Guangdong, China (Mainland)||Diameter:||D2-20MM|
|Hardness:||HRC45-65||Suitable For:||Carbon Steel|
|Overall Length:||35-100mm||Processing Type:||Metal Cutting Tools|
t slot milling cutter,
tee slot cutter
Tungsten steel T-Slot End Mill Cutter custom tungsten steel T milling cutter alloy T groove cutter to figure custom
Product composition:Tungsten steelF-ED-001 end mill Features
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
Suitable for hrc30-52 metal workpiece, the use of general good altin coating, the workpiece surface finish is better, the processing material versatility is more extensive, it is recommended to use high rigidity, high precision tool handle and barrel clip, comprehensive runout control within 0.005mm.Smooth chip removal design, enhance damage resistance, improve the processing surface finish,
Selects fine grain quality bar, processing imported five axis tool grinding machine, cutting tool inspection standard strictly, to ensure the consistency of the cutter size and beating altin nano coating, resistant to high temperature wear resistance, hardness and toughness of the notification with coating, suitable for 63 ° hard steel, hardened steel, aluminum, copper materials, under the condition of the bits ensure the space, the big core diameter design, greatly enhance the tool rigidity and vibration resistance, reduce the cutting knife, prolong service life.
Super raw material
|YG10X||YG10.2 &WF25(Taiwan)||K44 & K40 (German)||H10F (Sweden)|
T Slot End Mill Cutter advantage:
1, Through passivation technology, the tool adhesion particles are completely removed, the edge passivation, processing high hardness material is more convenient, anti-breakage edge, prolong the service life of the tool.
Sharp blade, irregular special new thin blade sharp while ensuring the durable wear of the tool
2, Large triangular groove, new arc edge, double edge belt, large hole can be machined on inclined surface without reducing cutting parameters.Large groove design, fast chip removal, less tool wear, rapid improvement of cutting efficiency, round neck tolerance in the 0.001-0.005 or so, international standard straight handle, processing process can effectively inhibit flutter, these high-quality quality basis.Balchas coating is specially used for hard alloy steel, fine rough hard steel and hard material of high performance coating, especially suitable for HRC60 above hardened steel.
3, Professional custom cutting cutter of all kinds, professional processing and application to create a whole series of carbide vertical milling cutter, with the advantages of flexibility, high speed and economic benefits, in order to provide excellent cost performance
Compared with the previous year, the cutting amount of the blade triangular slant groove design is larger, realizing the unprecedented high feed processing, the efficiency is increased by 200%, the precise chamfering contour is round and can effectively avoid the product bruising, so that the full effect of the product blade can be exerted.Double edge belt effectively removes burrs, USES the processed hole surface smoothness, the tolerance range is small, may replace part of the rough knife to use.
Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy compression strength, high hardness, good wear resistance, smooth handle with precise chamfering clamping more easily, complete specifications to meet the needs of a variety of apertures, support customization.
1. Physical Properties:overview
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager