Payment & Shipping Terms:
|Name Of The Cutting Tool:||End Mill Cutter||Machining Parts:||Outer Circle And Inner Circle Of Turning Parts|
|Other Service:||OEM/ODM Or Custom-made||Product Composition:||Tungsten Steel|
cnc milling cutters,
cnc router end mills
CNC End Mill Cutter High Demand Products For Cnc Metal Working Diamond Gold Milling Tools Cutter
Tungsten steel is also known as cemented carbide is a powder metallurgy product mainly composed of hard phase and bonding phase. The main carbides include: tungsten carbide (WC), titanium carbide, tantalum carbide and niobium carbide, and cobalt. In most cases, cobalt is used as bonding phase.The hardness of the tool made of tungsten steel can reach 10K, which is inferior to the hardness of diamond.Because of this, tungsten steel milling cutter is not easy to wear characteristics, brittle and hard not afraid of annealing, long service time, processing speed and other characteristics.
Non-uniform U groove design makes the chip removal space larger and smoother, suitable for large feed cavity processing, end edge insert milling processing.Finish, no Yin and Yang, vibration lines, bright line.
The front surface polishing makes the surface smoothness of the processed workpiece higher, the sharp Angle protection greatly enhances the rigidity and seismic resistance of the cutting tool, reduces the breaking of the cutting tool, extends the service life of the cutting tool, reduces The Times of changing the cutting tool, and improves the processing efficiency.
Adopt new double back Angle design, enhance the tool wear resistance, earthquake resistance, anti - chipping edge, extend the service life of the tool.
shenbing tools have the following Suggestions:
1, according to the structure of the processing products, materials and machining hardness choose the appropriate tool type.
2, check the power and stiffness of the machine tool, so that the required tool diameter can be used on the machine tool.
3. The overhang of the tool on the spindle should be as short as possible to reduce the impact load of the tool axis and the position of the workpiece.
4, the use of suitable for the process of the tool pitch, so that when cutting not too many blades and the workpiece at the same time and cause vibration, on the other hand, in the milling narrow workpiece or milling cavity to keep the blade and the workpiece mesh.
5, try to use the feed per blade, so as to get the cutting position when the chip thickness, so as to reduce tool wear.The front Angle grooved indexable blade is used to obtain smooth cutting power.
6, choose suitable for the width of the workpiece tool diameter.
|EDP No.||Dia(mm)||Angle||Flute Length(mm)||Flutes||Shank Dia(mm)||OverLength(mm)|
F-ED-001 end mill Features:
1. Suitable for steels & cast iron (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
End Mill Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager