Payment & Shipping Terms:
|Place Of Origin:||Guangdong, China (Mainland)||Overall Length:||50-10mm|
tee slot cutter,
t slot milling cutting tools
55 degree machining center right Angle T-slot cleaning cutter integral carbide tungsten steel non - standard T-typ
Passivation treatment not only makes the blade intensity increased tool life, also can make in the later than no passivation cutting tool machining more smooth and bright, the handle end chamfering processing, make the clamping more easily, also reduce the cutter wear and tear of the fixture, precise chamfering outline fruity effectively avoid bruising, make product blade play full effect.Double edge belt effectively removes burrs, USES the processed hole surface smoothness, the tolerance range is small, may replace part of the rough knife to use.
Super raw material
|YG10X||YG10.2 &WF25(Taiwan)||K44 & K40 (German)||H10F (Sweden)|
Screw design, large capacity smooth chip removal, prevent sticking knife, reduce heat, hard alloy compression strength, high hardness, good wear resistance, smooth handle with precise chamfering clamping more easily, complete specifications to meet the needs of a variety of apertures, support customization.The large core diameter design greatly enhances the rigidity and seismic resistance of the cutter, reduces the breakage and extends the service life.Through passivation technology, the tool adhesion particles are completely removed, the edge passivation, processing high hardness material is more convenient, anti-breakage edge, prolong the service life of the tool.
1. Physical Properties:overview
a. Hardness greater than or equal to 92.6 HRA;
b. Density greater than or equal to 14.4g/cm³;
c. TRS greater than or equal to 3800 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A02/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland, processing equipment;
3. It's proposed cutting less than 65HRC;
Product composition:Tungsten steelF-ED-001 end mill Features
1. Suitable for aluminum alloy (≤ 65 HRC)
2. High performance alcr series coating,high temperature resistance and high wear resistance.
3. Adapt to several kinds of cooling conditions, for example oil mist, water, oil, air cooling.
Q:Are you Manufacture?
A:Yes, we are manufacture. we produce our “JOEBEN “brand tools for gurantee the quality.
We also trading related tools for customers because we are in these field over 10 years, we are very familiar Chinese market tools. we usually help our customer choose the best suitable related tools for them.
Q: What is your delivery time?
A: Most of models are ex-stock, if out of stock,there usually need about 3-5 days or 7-10 days.
Q: Can you produce non-standard tools?
A: Yes, we can produce non-standard tools as per your drawing.
We also can design tools for you as per your usage requirement
Q:What is your advantages?
A: We are factory who produce our own brand “JOEBEN” tools, we must gurantee our brand quality. Also, we have factory price and fast delivery.
Contact Person: Sales Manager